Nytech DS-8210 User Manual

Nytech DS-8210 Capturing Pictures
English - 17
Capturing Pictures
Quick Guide
1. Power the Nytech DS-8210 on in Recording mode by pressing and
holding the Power button [1].
2. Point the camera at the subject and check the composition of your
picture on the display [12].
3. If necessary, press the Zoom button [4] to zoom in (T - Tele) or
zoom out (W - Wide) on the subject.
4. Press the shutter button [3] halfway down. This will enable the auto-
focus.
The Nytech DS-8210 will try to focus the area contained
within the focus area. This will depend on the lighting
conditions and the distance to the subject. If the camera
has focused the picture successfully, the focus frame will
become green, a beep will be heard and the power
indicator [2] will light green.
5. Now press the shutter button fully down to take the picture.
If the exposure time is too long (subject very dark) the shaky
image warning icon
will appear on the display. In this case it
is recommended that you use a tripod to stabilise the camera.
Read the chapters from page 30 to learn how to use preset programmes.
Focus area
i
i

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English