Nytech DS-8210 User Manual

Nytech DS-8210 Capturing Pictures
English - 23
Adjusts the white balance for fluorescent light. Try also
the
setting.
Adjusts the white balance for fluorescent light. Try also
the
setting.
Manual white balance (to enable, press the shutter
button [3], see below for a detailed description).
Manual White Balance
Select Custom WB with the icon
from the White Balance menu (see
above) and press the shutter [3] halfway down. In the centre of the display
[12] a frame will appear.
The following options are available:
Button Description
SH1
(Shutter)
Customise
Focus the displayed frame onto a white surface near the
subject and then press the (Shutter) button [3] fully down.
Menu Exit
Exits the manual white balance without changes.
When manually adjusting the White Balance, the white surface within the
frame will be used as reference for the colour temperature. If the metering
was successful and the colour temperature has been determined correctly,
confirm the message Custom WB? on the display by pressing the Set
button [8]. To repeat the calibration, press T on the four-way button and
confirm the Back option (icon
) by pressing the Set button [8]. Then
you can perform a new metering.
ISO
ISO is a unit derived from the traditional photography that determines the
sensitivity of the photographic material (film). Equivalent to these values,
the sensitivity of the sensor of your Nytech DS-8210 can be set. Use a
smaller value for a lower sensitivity, or select a higher value to obtain a

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English