Nytech DS-8210 - Audio Recording and Playback; Audio Recording

Nytech DS-8210 Audio Recording and Playback
English - 49
Audio Recording and Playback
Audio Recording
You can use your Nytech DS-8210 to record voice (dictaphone). To do so,
press the Power button [1] to power the camera on.
1. Press the camera mode button [10] to open the Program menu
(see also page 31 - Record Programmes).
2. Press
, , or on the four-way button [9] to choose the
option Voice REC (icon
).
3. Press SET [8] to confirm your selection.
4. Press the shutter button [3] to start recording. The status indicator
[2] will blink green.
5. Press the shutter button [3] to stop recording.
The current recording time will appear on the display [12] during
recording. The remaining recording time will be indicated in Stop
mode.
Voice recording takes place via the camera’s microphone [16].
Make sure that you don’t touch the microphone during recording
to avoid any noise.
i