Nytech DS-8210 Capturing Pictures
26 - English
Drive Mode
The functions in the Drive Mode menu allow you to programme the self-
timer or to enable the burst capture. The corresponding icon from the table
will be displayed on the LCD (see page 14 – item 8). The following settings
are available:
Option Icon Description
Off Normal single shot without any further modes.
2 sec.
Captures the photo with a 2-second delay after
pressing the shutter button [3]. *
10 sec.
Captures the photo with a 10-second delay after
pressing the shutter button [3]. *
Double
Captures the photo with a 10-second delay after
pressing the shutter button [3], plus a second
photo after an extra 5-second delay. *
Burst
After enabling this function you can capture a
picture sequence. The camera will shoot one
picture per second while you keep the shutter
button [3] pressed, and the status indicator [2]
will blink green.
* Once enabled, the self-timer indicator [13] starts
blinking red, the status indicator [2] blinks
alternating red/green and acoustic signals can
be heard.
To Next Page
Loading...
