Nytech DS-8210 User Manual

Nytech DS-8210 Recording Video Clips
36 - English
Recording Video Clips
Quick Guide
Your Nytech DS-8210 allows you to record video clips.
1. Press the Power button [1] to power the camera on.
2. Press the camera mode button [10] to open the Program menu.
3. Press
, , or on the four-way button [9] to choose the
option Movie (icon
).
4. Press the SET button [8].
5. Focus the desired subject area by using the LCD [12]. The
remaining recording time will be shown on the display (see figure).
Resolution
Remaining recording time
6. Press the shutter button [3] to start recording. The status indicator
[2] will blink green.
7. To stop recording, press the shutter button [3] again. To pause the
recording, press
on the four-way button (the status indicator [2]
lights green). To resume a paused recording, press
on the four-
way button again.
While recording a video clip you can press the zoom buttons [4].
However, while pressing the zoom buttons no sound will be
recorded.
In automatic mode, white balance will be fixed to the value for
the first frame.
The digital zoom is not available during video clip recording.
i

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English