Nytech DS-8210 User Manual

Nytech DS-8210 Connectors
56 - English
Connectors
Viewing Pictures on a Television Screen
Any pictures that you can view on the Nytech DS-8210 display [12] can
also be played back on a regular TV set. For this, your television set must
have an appropriate Video In connector.
Use the supplied AV cable to connect the product to a television set.
AV cable
Connection port
Connector
AV connection jack (video – yellow, audio - white)
1. Power your Nytech DS-8210 off.
2. Insert the AV cable connection jack into the connection port of your
camera (see above figure).
3. Insert the AV connection jacks into the corresponding inputs of your
TV set (yellow connector to VIDEO IN, white connector to AUDIO
IN). Please also consult your TV set’s User Manual for more
information.
4. Select the AV channel corresponding to the above input connectors
on your TV set. This is a device-specific setting. If necessary, read
the User Manual of your TV set for more information on how to do
this.
5. Power the camera on in Playback mode by pressing and holding
the Play button [5].
The display [12] on the Nytech DS-8210 will remain off while the AV cable
is connected to the AV port. Instead, the pictures will be played back on
your television set. Control the camera as usual, e.g. start a slide show
(see page 43 – Slide Show) to play all images automatically.

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English