Nytech DS-8210 User Manual

Nytech DS-8210 Capturing Pictures
34 - English
The macro button can be found on the four-way button:
Macro button
1. Power the camera on in Record mode.
2. Press the Macro button (icon
) located on the four-way button [9]
(see the above figure). The macro mode icon will be displayed on
the LCD (see page 14 – item 7).
3. Press the shutter button [3] to take the picture.
4. To exit the macro mode, press the Macro button (icon
) again.
ASM Mode
In ASM mode you can set the aperture value and/or the shutter speed
manually. The enabled ASM mode is indicated by the icons A, S or M on
the LCD (see page 14 – Recording Mode, item 1). To disable the ASM
mode, enable the record programme mode P by pressing the camera mode
button [10] and confirming by pressing the Set button [8] (see also page 31
– Record Programmes).
While in Recording mode press the ASM button [11] several times to cycle
between the following options.
Aperture
Mode: A
With a higher aperture setting, the lens opening will be smaller so less light
will incide onto the image sensor. By means of a circular shading
distribution a better depth of field can be achieved. A smaller aperture
value will reduce the depth of field, softening the distant background and
sharpening the foreground (e.g. when taking a portrait picture).
Figure: Four-way button [9]

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English