2-6 Print Controller User’s Guide
Chapter 2 Printer Driver Setup
Installation using [Add Printer]
1. Turn on the computer and start Windows.
Exit from all active Windows applications, if required.
2. Log on as an administrator (or a user entitled to install a printer).
3. Click the [Start] button of the task bar. Then, select [Settings] of the Start
menu and click [Printers] from the sub-menu.
The [Printers] window will open.
Opening from [My Computer]
To open the [Printers] window, double-click the [Printers] folder (or [Control
Panel] - [Printers]) after double-clicking the [My Computer] icon on the desktop.
4. Double-click the [Add Printer] icon of the [Printers] window.
The [Add Printer Wizard] will appear for adding the printer.
5. In case of Windows 2000, click the [Next] button.
In case of Windows NT4.0, follow steps 6.
6. Select [Local printer] (Windows 2000)/ [My Computer] (Windows NT4.0) and
click the [Next] button.
When the printing system is directly connected to a computer in which the printer driver will
be installed, select [Local printer] (Windows 2000)/ [My Computer] (Windows NT4.0).
Windows 2000
When using Windows 2000, the default setting of the [Automatically detect and
install my Plug and Play printer] is “on”. For manual installation, turn it “off” by
clicking.
Selecting [Network]
When personal computers or workstations are connected to the network and
you want to print via
the network, connect to the optional network interface card
and select [Network printer]
(Windows 2000) / [
Network printer server
] (Win-
dows NT4.0)
.
For a
[Network printer]
(Windows 2000) / [
Network printer server
] (Windows
NT4.0), type the network path or queue name and click the [Next] button. If you
don’t know its name, click the [Browse] button to view available network printers
then follow steps 7 to 20.
To Next Page
Loading...