Print Controller User’s Guide 2-7
Chapter 2 Printer Driver Setup
7. Select or create the Printer Port to install the printer controller and click the
[Next] button.
The next [Add Printer Wizard] window will appear.
8. Click the [Have Disk] button.
The [Install From Disk] window will appear.
9. Click the [Browse] button.
The [Open] window will appear.
10. Set the “User Software CD” on the CD-ROM drive.
11. Select the [oemsetup.inf] file in the “Prn_Scan\Printer\WinNT_2000” folder of
the “User Software CD” and click the [OK] button.
The [Install From Disk] window will appear.
12. Click the [OK] button.
The next [Add Printer Wizard] window to select the manufacturer and model of the printer
will appear.
In the list of [Printers], [Océ 3275/750 PCL] will be highlighted.
13. Click the [Next] button.
The next [Add Printer Wizard] window to specify the printer name will appear.
14. Specify the printer name and click the [Next] button.
Default: [Océ 3275/750 PCL]
The next [Add Printer Wizard] window to perform the test page will appear.
15. Select [Do not share this printer] (Windows 2000) / [Not shared] (Windows
N4.0) or [Share as] (Windows 2000) / [Shared] (Windows N4.0) by clicking.
In case of [Share as] (Windows 2000) / [Shared] (Windows N4.0), specify the
share name of the printer.
Default: [Océ 32757]
16. Click the [Next] button.
The next [Add Printer Wizard] window to perform the print test will appear.
17. Select whether you will perform the print test or not.
Select [Yes (recommended)] (Windows 2000) / [Yes] (Windows N4.0) to print the test page,
or select [No] to not print it.
18. Click the [Next] button.
The [Add Printer Wizard] completion window will appear.
19. Click the [Finish] button.
In case of Windows NT4.0, necessary files will be copied from the “User Software CD” to
complete the installation.
To Next Page
Loading...