3-38 Print Controller User’s Guide
Chapter 3 Printer Driver Functions
Angle
Control the “lean” angle of the watermark by sliding this control back and forth or by
typing a number in the text value box from 0 degrees to 360 degrees (a full circle all
the way around).
Adjustment
Select [Move] or [Rotate] by clicking the radio button.
When [Move] is selected, you can move the watermark as you position it manually by
clicking on the page sample and “dragging” the mark around.
When [Rotate] is selected, you can rotate the watermark as you position it manually by
clicking on the page sample and “dragging” the mark around.
Show layout / Show single page
When [Show layout] button is clicked, you can preview how your [pages per sheet]
options selected in the [Options] tab will look with the current watermark settings. The
[Show layout] button will change to the [Show single page] button by clicking it.
When the [Show single page] button is clicked, you can preview how the single page will
look with the current watermark settings. The [Show single page] button will change to
the [Show layout] button by clicking it.
New
When the [New] button is clicked, [Custom watermark n] appears in the [Text] box.
Create the new watermark text, to replace the current text by typing the new text and
pressing the [Enter] key. When the [Enter] key is pressed, the [Text Change & Image
Request] screen will appear. Click the [Yes] button, [No] button, or [Cancel] button.
When you click the [Yes] button, your newly created watermark text will appear in the
available-for-use list when you click the [▼] button beside the [Text] box.
Delete
Click this to delete the current watermark.
You cannot undo this action, so be sure the currently-displayed watermark is
the one you wish to delete.
Restore Defaults
When the [Restore Defaults] button is clicked, the [Watermark - Restore Defaults Re-
quest] screen will appear.
• Clicking the [Yes] button resets all the settings to their factory defaults except [Custom
watermark] you have created by pressing the [New] button.
• Clicking the [No] button resets the setting to factory default.
To Next Page
Loading...