Print Controller User’s Guide 4-3
Chapter 4 Control Panel Setup
6STOP
Stops the copying sequence, scanning or printing; deletes the stored memory.
7 TIMER
Lights when the timer function is set.
8 POWER SAVER ON/OFF
Activates power-saving mode for times when the copier is inactive, or activates timer
interrupt mode when weekly timer function is active.
9START
Activates scanning or copying.
Restarts the printing after Wait Mode - Wait or Proof.
10 [C] (CLEAR QTY.)
Allows resetting of print quantity.
11 [P] (COUNTER)
Displays the Counter Screen or accesses programming modes for setting special func-
tions.
12 HELP
Displays a screen with help for the currently selected function.
13 AUTO RESET
Restores copier to automatic mode settings or to key operator settings.
14 JOB MEMORY
Displays screens for selecting job store/job recall functions.
To Next Page
Loading...