4-4 Print Controller User’s Guide
Chapter 4 Control Panel Setup
● LCD Touch Screen
The touch screen is an LCD (liquid crystal display) that displays interactive screens with
touch sensitive keys for making copy/print job selections. Selections are highlighted at the
touch.
The screens also work with the conventional control panel keys.
The touch screen of the control panel is covered with glass. Do not drop heavy
items on the glass, or put excess weight or pressure on it; otherwise the glass
may break or become scratched.
After the power switch is turned on, the Océ name displays for approximately 10 seconds,
until initial machine settings are established. Then, the 7 levels of Warm-Up Screen displays
for approximately 6 minutes, until the fixing temperature is reached.
When the [Basic Screen] (copy mode basic screen) is displayed, the touch screen becomes
interactive. The interactive condition enables you to communicate directly with the printing
system/copier system/scanner system simply by touching keys displayed on the screen; or
by pressing conventional keys, as required.
[Basic Screen] (copy mode basic screen)
When you touch the [STATUS] key on the Basic Screen, the Job Status Screen will be
displayed.
[Job Status Screen]
These screens automatically display information regarding copying/printing status, print job
status and settings.
To Next Page
Loading...