Introduction 11
Attention: When you increase the security level to Medium or High, some of
the functions of the system cannot operate. When the security level is set to
Standard, all Océ Power Logic® features are available.
When you increase the security level to Medium, the following features are not
available.
■ Scan to file to remote destinations
■ Océ Remote Logic
®
■ Printing through Novell Pserver
■ Various network connectivity protocols.
When you increase the security level to High, the following features are not
available.
■ Scan to file to remote destinations
■ Océ Remote Logic
®
■ Printing through FTP (File Transfer Protocol)
■ Printing through Novell Pserver
■ Various network connectivity protocols.
Note: Please contact your local Océ Service organization for complete
information.
Océ Remote Logic
®
enables you to connect to the Océ Power Logic
®
Controller from a remote workstation.
Océ Settings Editor The Océ Settings Editor allows you to set the default
settings of the Océ TDS320 according to your companies requirements.
Refer to ‘Océ Power Logic®: The Settings Editor’ on page 95, for complete
information about the Océ Settings Editor application.
Océ TDS320 options
By default, the Océ TDS320 has an automatic 1 roll unit and is equipped with
a receiving tray as the output delivery device. The receiving tray is the rack on
the bottom of the printer (see figure 1 on page 12).
Automatic 2-roll unit The Océ TDS320 is available with an automatic 2-roll
unit. Each of the rolls can be loaded with print material of a different size or
To Next Page
Loading...
