Oce TDS320 - Installation procedure for MS Windows systems

Install and start Océ Remote Logic® on a workstation 85
Installation procedure for MS Windows
®
systems
Before you install Océ Remote Logic
®
, you must take note of the following
minimum system requirements for the remote system. The system must be a
Pentium
®
233 with 32 Mb RAM running Windows 95, 98, NT
®
(service pack
3), Windows
®
2000, or Windows
®
XP. Contact your local Océ organization for
more possible systems.
You will find the Océ Remote Logic
®
application on the Océ TDS320
CD-ROM and on the Océ Power Logic
®
Controller CD-ROM provided with
the system. The installation procedure for Remote Logic
®
is quite simple and
self-explanatory. When you select the ‘Install remote applications’ option on
the CD-ROM, a Wizard starts to guide you through the installation process.
When the installation process is complete you do not have to restart your
system.
Note: Océ Remote Logic
®
only works when TCP/IP is enabled on your system.
Refer to your system administrator for assistance with the installation
procedure for TCP/IP.
▼ Install Océ Remote Logic
®
1 Insert the Océ Remote Logic
®
CD-ROM or the Océ Power Logic
®
Controller
CD-ROM into the CD-ROM drive of your PC.
2 Select the ‘Install remote applications’ option.
The installation Wizard starts, and asks to select a setup language.
[35] Choosing a setup language