Oce TDS320 - Resolution

Use the Océ TDS320 to Scan to file 63
Note: The names of the destinations can be any. However, for your
convenience, you are able to define understandable nicknames in the Océ Scan
Manager application
(see ‘Create a local destination’ on page 70).
Checkprint
A Checkprint is a print from the scanned original. You can turn Checkprint on
or off.
▼ Select Checkprint
1 Press the Output key to select ‘file’.
2 Press the Extra key.
3 Select ‘Checkprint’ with the or key.
4 Press the key, to enter the ‘Checkprint’ menu.
5 Select ‘on’ or ‘off’ with the or key.
6 Press the Confirm key.
Resolution
The Océ TDS320 Scan Logic® option can scan three resolutions:
■ 200 dots per inch (dpi)
■ 300 dpi
■ 400 dpi
To reach the best print quality on the Océ TDS320 select 300 dpi.
▼ Select the resolution
1 Press the Output key to select ‘file’.
2 Press the Extra key.
3 Select ‘File resolution’ with the or key.
4 Press the key, to enter the ‘File resolution’ menu.
5 Select the needed resolution with the or key.
6 Press the Confirm key.