Printer supplies and maintenance 115
[50] Feed the material
If you want to cut the paper to get a straight leading strip refer to ‘Cut media’
on page 26.
Otherwise continue with the next step.
7 Close the lower paper compartment.
8 Press the On-line key.
How to program media settings
If you insert a new roll with another material or with a different width, set the
new roll specifications.
The width of the material
Material Size
A0 841 mm
A1 594 mm
A2 420 mm
A3 297 mm
E 34 in
D 22 in
C 17 in
B 11 in
E+ 36 in
D+ 24 in
C+ 18 in
B+ 12 in
30 in 30 in
B1+ 700 mm
B2+ 500 mm
Note: The default is 36 inch
To Next Page
Loading...
