Oce TDS320 - Page 53

Use the Océ TDS320 to copy 53
▼ Set the time-out for manual feed
Default is 60 seconds.
1 Press ‘on-line’ on the printer operator panel, to enter the main menu.
2 Select the ‘media settings’ item with the or key.
3 Press ‘next/select’ to enter the ‘media settings’ menu.
4 Select ‘manual feed’ with the or key.
5 Press ‘next/select’ to enter the ‘manual feed’ menu.
6 Select the ‘time out’ with the or key.
7 Press ‘next/select’ to enter the ‘time out’ menu.
8 Select the desired time out with the or key.
9 Press ‘next/select’ to confirm the selected timeout.
10 Press ‘on-line’ to leave the main menu.