Wireless configuration for Macintosh using the Océ installer application
67
5
i Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the machine are powered on, and then click Refresh.
Note
• The default Node name is “BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address /
Ethernet Address.)
• You can find your machine’s MAC Address / Ethernet Address by printing out the Network Configuration
List. See Printing the Network Configuration List on page 119.
j The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
Oce VL3200x
192.168.11.3
To Next Page
Loading...
