35
TO SET - FO2 50% DEFAULT
(while in the Surface Mode)
Factory set ON, the FO2 50% Default feature can be set to
OFF. The effects of this feature being ON or OFF are de-
scribed on page 17.
• Press Both buttons simultaneously, release when SET: 2
appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 11 more times.
• The graphics FO2 and 50 appear with ON (or OFF)
flashing (Fig. 35).
• Press and release the Select (Side) button to toggle be-
tween ON and OFF.
• Press the Advance (Front) button to accept the setting and
advance to Set Backlight Duration, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 35 - Set FO2 50% Default
To Next Page
Loading...
