36
TO SET - BACKLIGHT DURATION
(while in the Surface Mode)
Factory set for 7 (seconds), the Backlight Duration can be set
to values of 0, 3, or 7 (seconds).
• Press Both buttons simultaneously, release when SET: 2
appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 12 more times.
• The graphic GLO and Time icon appear with the Dura-
tion value flashing (Fig. 36).
• Press and release the Select (Side) button to advance the
Duration from :00 to :03 to :07 (seconds).
• Press the Advance (Front) button to accept the setting and
advance to Set Sampling Rate, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 36 - Set Backlight Duration
To Next Page
Loading...
