OHAUS Explorer Balances - B.2 Service Sub-Menu

APPENDIX B - SERVICE MENU
Ohaus Corporation www.ohaus.com 66 Explorer
®
Series Service Manual
B.2 Service Sub-Menu
The Service sub-menu, allows authorized service personnel to monitor Ramp or perform a variety of
service weight calibrations. A password is required to access this menu. The current password is
“Explorer” (SW: 1.10) and “OHAUS” (SW: 1.03). Software in the initial production units may not
have all of the service items shown.
Menu
Diagnostics
Service Mode
Ramp
3P-Service
Linearization
3P-Service
Linearization
Internal Weight
Calibration
Service Span
Calibration
Service Internal
Calibration
Internal
Repeatability Test
Balance Info
Exit Service Mode