EasyManua.ls Logo

Oki C9600 - Page 210

Oki C9600
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oki Data CONFIDENTIAL
42930511TH Rev. 2 210 /
(A)
NO [NG CALIBRATION LEFT/RIGHT] display
YES Is the color drift sensor cover dirty?
YES Cleaning defect of the surface of the sensor cover by the cleaning
blade on the rear of the shutter. Replace the shutter and sensor
cover then restore the cleaning performance.
NO Check the S2Z PCB (Color Drift Sensor PCB) connector, S2V PCB (engine
PCB) CSNS, power connector and the connector connected with Sensor-
Right Assy connection. Has operation been restored after checking connec-
tion?
YES END
NO Replace the S2Z PCB. Has operation been restored?
YES END
NO Replace the engine PCB. Has operation been restored?
YES END
NO Replace the S2Z PCB, and Engine PCB connection cable. Has operation
been restored?
YES END
NO [DYNAMICRANGE LEFT/RIGHT] display
YES Is the color drift sensor cover dirty?
YES Cleaning defect of the surface of the sensor cover by the cleaning
blade on the rear of the shutter. Replace the shutter and sensor
cover then restore the cleaning performance.
NO Is the shutter open/close operation abnormal?
YES Replace the shutter. Has operation been restored?
YES END
NO Replace the shutter open/close solenoid. Has operation been re-
stored?
YES END
NO Replace the belt unit. Has operation been restored?
YES END
NO Replace the ID unit. Has operation been restored?
YES END
(B)

Table of Contents

Other manuals for Oki C9600

Related product manuals