Oki Data CONFIDENTIAL
42930511TH Rev. 2 235 /
7.8.1.5 Check the key exchange method of the certificate
Check the key exchange method of the certificate stored in the printer.
There is a possibility that the browser does not support the key exchange method that has been
selected.
Refer to the browser key exchange method support state (Appendix C), and create the certificate of
the appropriate key exchange method again or change the browser to the one that supports the selected
key exchange method.
When you decide to create the certificate again, refer to 5.2 Creating a certificate from Web browse,
or 5.3 Creating a certificate from AdminManager.
How to confirm the key exchange method
You can confirm the key exchange method with AdminManager and Network Information.
If you cannot display the printer setup page by the Web browser, confirm the key exchange
method by using AdminManager or printing Network Information.
Steps to confirm the key exchange method are shown below:
Confirming the key exchange method by AdminManager
1) Start AdminManager and select the printer you
want to confirm, from the list that has been dis-
played.
2) Click on the Set Oki Device button, or select
Setting and then Set Oki Device to open the
setting dialog box.
3) Type in admin password and open the setting
dialog box as administrator.
4) Click on SSL/TLS Tab.
To Next Page
Loading...
Need help?
General
