Oki C9600 - Page 73

Oki Data CONFIDENTIAL
42930511TH Rev. 2 73 /
2. Put the bottom surface of printer on the tray 2 aligning the protrusion with the cut
on the bottom.
Note! The printer weighs about 77 kg. Lift it by three or more persons.
3. Plug the power supply cord and the printer cable in and switch on the power supply.
4. Print a menu map to see if installed correctly.
Re-install if an error appears on the menu map.
5. Set up for the option tray by a printer driver.
Do the reverse procedure from installation for removal.
Cut on bottom
surface of printer
Protrusion
Power supply cord
Print cable
ON