Oki ES6450 - Page 110

Changing settings from the operator panel
- 110 -
Item
Factory
default
settings
Description
Paper Black Setting (Fn230) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
mono printing when [Plain] is selected as
[Media Type]. Decreases the value if printing
such as scattered or snow-covered printing
occurs in high-density printing. Increases the
value if printing is blurred. Adjusts within the
range of ±2.
Paper Color Setting (Fn231) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
color printing when [Plain] is selected as
[Media Type]. Decreases the value if printing
such as scattered or snow-covered printing
occurs in high-density printing. Increases the
value if printing is blurred. Adjusts within the
range of ±2.
Trans. Black Setting (Fn232) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
mono printing when [Transparency] is
selected as [Media Type]. Decreases the
value if printing such as scattered or
snow-covered printing occurs in high-
density
printing. Increases the value if printing is
blurred. Adjusts within the range of ±2.
Trans. Color Setting (Fn233) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
color printing when [Transparency] is
selected as [Media Type]. Decreases the
value if printing such as scattered or
snow-covered printing occurs in high-
density
printing. Increases the value if printing is
blurred. Adjusts within the range of ±2.
SMR Setting
(Fn234)
Cyan
0
Corrects printing variations for each color
due to differences in the temperature and
humidity environment, and the printing
density/printing frequency. Changes the
value if there is burr in the image. Adjusts
within the range of ±3.
Magenta
0
Yellow
0
Black 0
BG Setting
(Fn235)
Cyan
0
Corrects printing variations for each color
due to differences in the temperature and
humidity environment, and the printing
density/printing frequency. Change the value
if the underlay is dark. Adjusts within the
range of ±3.
Magenta
0
Yellow
0
Black 0
HU Setting Off Sets the mode to remove the dirt due to
leaving this machine idle for a long period of
time.
VL Cleaning Execute Improves the printing result when there are
white streaks in the vertical direction.
Gloss Mode Off A mode used to print with an increased fixing
temperature and improved gloss.
Please select [On] when you want to print
more glossy.