Oki ES6450 - Page 122

Changing settings from the operator panel
- 122 -
Item
Factory
default
settings
Description
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
Off
Selects whether to print blank pages.
CR Function CR Selects a carriage return from [CR] or
[CR+LF].
LF Function
LF
Selects a line feed from [LF] or [LF+CR].
Line Length
80 Column
Specifies the number of characters per line.
Form Length 11.7 inch or
11 inch
*1
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of
paper.
Left Margin 0.0 inch Specifies the distance from the left edge of
paper so that the print starting point shifts to
the right horizontally.
Fit to Letter Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
(66 lines).
Text Height Same Sets the height of a character.
Same: The height stays the same regardless
of CPI.
Diff: The height varies according to CPI.
EPSON FX
Setup
Character Pitch
10 CPI
Specifies character pitch.
Character Set
SET-2
Specifies a character set.
Symbol Set
IBM-437
Specifies a symbol set.
Letter O Style Disable Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Zero Character
Normal
Sets the zero to be slashed or unslashed.
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
OFF
Selects whether to print blank pages.
CR Function CR Select a carriage return from [CR] or
[CR+LF].
Line Length
80 Column
Specifies the number of characters per line.
Form Length 11.7 inch or
11 inch
*1
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of
paper.
Left Margin 0.0 inch Specifies the distance from the left edge of
paper so that the print starting point shifts to
the right horizontally.
Fit To Letter Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
(66 lines).
Text Height Same Sets the height of a character.
Same: The height stays the same regardless
of CPI.
Diff: The height varies according to CPI.
Private Print
Setup
Verify job option Disable Specifies whether to verify the print data
before printing.
If enabled, printing is performed after
verifying that the print data has not been
changed. The integrity of print data is
guaranteed, but the time to start printing will
be longer.