Oki ES6450 - Page 124

Changing settings from the operator panel
- 124 -
Item
Factory
default
settings
Description
Daylight Saving Off Sets the daylight saving (daylight saving
time).
Setting method Manual
Setup
Selects how to set the time.
SNTP Server(Primary)
(Blank)
Sets the SNTP server used to set the current
date and time. Up to 64 characters can be
used.
Displayed when [Auto Setup] is selected as
the setting method.
SNTP Server(Secondary) (Blank)
Time Setting 2001/01/01
00:00:00
The time is set at factory delivery. Change
the date and time if necessary.
Displayed when [Manual Setup] is selected
as the setting method.
Power Setup Auto Power Off Auto Config Sets the operation of Auto Power Off.
Auto Setup: Auto Power Off does not work
for network (wired/wireless) connection.
Enable: Auto Power Off works regardless of
the connection method.
Disable: Auto Power Off does not work.
Tray Setup Unit of Measurement millimeter
Sets the unit of measurement for the custom
size (mm/inch).
Default Paper Size
A4
Sets the default paper size of a custom size.
Others Setup Paper Feed
Roller
Counter
Clear
MP Tray Clear Execute
Clears the counter after the paper feed roller
of the MP tray is replaced.
Tray1 Clear Execute
Clears the counter after the paper feed roller
Tray 1 is replaced.
Tray2 Clear Execute Clears the
counter after the paper feed roller
Tray 2 is replaced.
Tray3 Clear Execute
Clears the counter after the paper feed roller
Tray 3 is replaced.
Tray4 Clear Execute
Clears the counter after the paper feed roller
Tray 4 is replaced.
Flash
Memory
Setup
Initialize
Execute
Initializes the flash memory.
Format Partition PCL Formats the specified partition of a flash
memory.
Job Log
Setup
Save Job Log
Disable
Sets whether to save a log of print data.
Clear Job Log Execute Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Security
Setup
Access Control
Disable
Sets whether to enable access control.
User Counter Report Execute
Prints a user counter report. Displayed when
access control is set to [Enable] and [Save
Job Log] is enabled.
Language
Setup
Select Language English Selects the display language of the display.
Job Cancel
Setup
Cancel Key Behavior Short Sets the actions when the cancel button is
pressed.
Short: A short press (for 2 seconds or less)
cancels the printing.
Long: A long press for 2 to 5 seconds
cancels the printing.
Off: Pressing the cancel button does not
cancel the printing.