Oki ES6450 - Page 125

Changing settings from the operator panel
- 125 -
Item
Factory
default
settings
Description
Inquiry Display On Sets whether to display a screen to confirm
whether to cancel the printing.
Focus Position Yes Sets whether to select [Yes] or [No] as the
initial value on the job cancel inquiry screen.
Display Timeout 180 Sets the waiting time in seconds before a
button is pressed on the job cancel inquiry
screen. When the waiting time has passed,
the printing will be continued instead of
being canceled.
Near Life
Setup
Drum Near Life Timing 1500 Sets whether to display the number of
copies before the image drum is
approaching the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Fuser Near Life Timing 1500 Sets whether to display the number of
copies before the fuser unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Belt Near Life Timing 1500 Sets whether to display the number of
copies before the belt unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Erase Privacy Data Execute Erases the following data set in this
machine.
• Admin password, values set in various
menus
• Various records
• Access control registered to this machine,
user information
NFC Setup
Enable
Enables/Disables the NFC function.
Settings Reset Settings Execute Resets the menu settings changed by the
user to the factory default settings.
Save Settings Execute Saves the current menu settings. Menu
settings that have been saved previously will
be overwritten.
Restore Settings Execute Restores settings to the saved menu
settings.
Change
Password
New Password
-
Input a new admin password.
Verify Password - Input the new admin password again to
verify.
*1 Factory default setting values are different according to the country or region.