2KR/2KS
1-2-9
1. Turn the main power switch on. Toner installation is started.
2. The drive chain is disengaged when toner installation is completed.
Run maintenance mode U130 if [Add Toner] remains displayed even after the drive chain is disengaged.
1. Enter the maintenance mode by entering 10871087 using the numeric keys.
2. Enter 278 using the numeric keys and press the start key.
3. Select [TODAY] and press the start key. The delivery date is set.
4. Press the stop key.
1. Enter 000 using the numeric keys and press the start key.
2. Select [MAINTENANCE] and press the start key to output a list of the current settings of the maintenance items.
3. Press the stop key.
1. Enter 001 using the numeric keys and press the start key. The machine exits the maintenance mode.
1. Select [Report Print] to output the user various setting reports.
1. Place an original and make test copies.
1. According to need, attach the correspond language label.
Installing toner.
Setting the delivery date (maintenance item U278).
Output an own-status report (maintenance item U000).
Exit maintenance mode.
Print out the user setting list.
Make test copies.
Attaching the language label (230 V specifications only).
Completion of the machine installation.
Y111960-2 Service Manual
To Next Page
Loading...
Need help?
General