3-16
Preparation before Use > Loading Paper
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting)
Specify the paper size and media type of paper to be used in the multi purpose tray.
1
Display the screen.
[System Menu/Counter] > [Quick Setup Wizard]
2
Select a function.
Select [Paper Setup].
3
Configure the function.
Start the wizard. Follow the instructions on the screen to configure settings.
Item Description
Paper Size Metric Select from the Metric standard sizes.
Values: A4, A5, A6, B5, B6, Folio, 216 × 340 mm
Inch Select from the Inch series standard sizes.
Values: Letter, Legal, Statement, Executive, Oficio II
Other Select from special standard sizes and custom sizes.
Values: 16K, ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Hagaki (Cardstock),
Oufukuhagaki (Return postcard), Youkei 4, Youkei 2
, Custom
*1
*1 For instructions on how to specify the custom paper size, refer to the following:
Custom Paper Size (page 8-12)
Media Type
*2
*2 To change to a media type other than "Plain", refer to the following:
Media Type Setting (page 8-14)
Select the media type.
Values: Plain (60 to 105 g/m
2
), Rough, Transparency, Vellum, Labels,
Recycled, Preprinted
*3
, Bond, Cardstock, Color, Prepunched
*3
, Letterhead
*3
,
Envelope, Thick (106 to 220 g/m
2
), High Quality, Custom 1-8
*3 To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action (page 8-13)
• The available media types for printing received faxes are as shown below.
Plain, Label, Recycled, Bond, Vellum, Color, Envelope, Cardstock, Thick, High Quality, Rough and Custom 1 to 8
• Set the paper size of the multi purpose tray used for fax reception as follows:
Inch models: Letter, Legal, Statement
Metric models: A4, B5, A5, Folio
If the above setting is changed, it will not be possible to print faxes.
To Next Page
Loading...
Need help?
General
