Olivetti d-COPIA5514MF User Manual

6-23
Using Various Functions > Functions
Copying
Prints 1-sided originals to 2-sided, or 2-sided originals to 1-sided. Select the binding orientation for original and finished
documents.
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, select [Finish Scan] to start copying.
Printing
Print a document on both sides of the paper.
Item Value Description
1-sided>>1-sided ― Disables the function.
1-sided>>2-sided ― Copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-15)
2-sided>>1-sided ―
2-sided>>2-sided ―
Others Duplex 1-sided>>1-sided,
1-sided>>2-sided,
2-sided>>1-sided,
2-sided>>2-sided
Select the desired duplex option.
Binding in Original
*1
*1 Displayed when [2-sided>>1-sided] or [2-sided>>2-sided] is selected for "Duplex".
Left/Right, Top Select the binding orientation of originals.
Binding in Finishing
*2
*2 Displayed when [1-sided>>2-sided] or [2-sided>>2-sided] is selected for "Duplex".
Left/Right, Top Select the binding orientation of copies.
Original Orientation
*1, *2
Top Edge on Top,
Top Edge on Left,
Auto
*3
*3 This does not appear if the optional OCR Scan Activation Kit is installed but expansion memory is not installed.
Select the orientation of the original document top edge to
scan correct direction.
Item Description
1-sided Disables the function.
2-sided Prints a 2-sided document so that the sheets are aligned properly for binding on the left
or right.
2-sided Prints a 2-sided document so that the sheets are aligned properly for binding on the top.

Olivetti d-COPIA5514MF Specifications

General

Brand	Olivetti
Model	d-COPIA5514MF
Category	All in One Printer
Language	English