11-7
Appendix > Optional Equipment
(7) IB-51 "Wireless Network Interface Kit"
This is a wireless LAN interface card which supports the wireless LAN specifications IEEE802.11n (Max 300 Mbps) and
11 g/b.
With the utilities supplied, settings are possible for a variety of OS and network protocols.
IB-51 User's Manual
(8) PT-320 "Rear Tray" (
d-COPIA 5514MF/d-COPIA 6014MF only)
Use the faceup output tray when you wish paper to be stacked with the printed side facing up (reverse order). The rear
tray can only be used for printing from a PC.
Installing the Rear Tray
1 Install the paper stopper according to the size of paper to be used.
2 Install the rear tray on the rear of the machine.
(9) M
S-5100B "Manual stapler" (d-COPIA 5514MF/d-COPIA 6014MF only)
It can staple the originals or the printouts. The number of sheets that can be stapled together is 20 sheets (80 g/m
2
).
(10) IB-36 "Wireless Network Interface Kit"
This is a wireless LAN Interface card which supports the wireless LAN specifications IEEE802.11n (Max 65 Mbps) and
11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is supported.
(11) Data Security Kit(E) "Data Security Kit"
The Data Security Kit overwrites all unnecessary data in the storage area so that it cannot be retrieved. The Data
Security Kit encrypts data before storing it in the SSD. It guarantees higher security because no data cannot be decoded
by ordinary output or operations.
To Next Page
Loading...
Need help?
General
