2-36
Installing and Setting up the Machine > Quick Setup Wizard
1
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
2
Select a function.
3
Configure the settings.
Start the wizard. Follow the instructions on the screen to configure settings.
[Next>]>
Network Setup Configures network settings.
1. Network Wi-Fi
*5
Wi-Fi
Available Network
Wired Network Obtain IP Address
IP Address
*6
Subnet Mask
*6
Default Gateway
*6
*1 FAX functions are available only on products with the fax function installed.
*2 Displayed only when the size dial on the cassette is set to "Other".
*3 Displayed only when the optional paper feeder is installed.
*4 This function is displayed when [Weekly Timer] is set to [On].
*5 This function is displayed when the optional Wireless Network Interface Kit is installed.
*6 Not displayed when "Obtain IP Address" is set to [Auto (DHCP)].
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
d-COPIA 4513MF plus d-COPIA 5514MF d-COPIA 6014MF
d-COPIA 4514MF plus
5500 6000
Login User Name: 4500
Login Password: 4500
5500 6000
If you experience difficulty configuring the settings, refer to the following:
Help Screen (page 2-21)
Control Description
End Exits the wizard. Settings configured so far are applied.
Previous Returns to the previous item.
Skip Advances to the next item without setting the current item.
Next Advances to the next screen.
Back Returns to the previous screen.
Complete Register the settings and exit the wizard.
To Next Page
Loading...
Need help?
General
