100
EN
Shooting
2
Photo File and Image Size Options (KK)
You can set an image quality mode for still images. Select a quality suitable for the
application (such as for processing on PC, use on website etc.).
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [KK].
• When [Dual Independent 1] or [Dual Independent 3]
is selected for [K Save Settings], a different setting
can be used for each slot (P. 99).
sRGB
Natural
S
Normal
WB
Auto
ISO
Auto
M-IS
±
0
A
±
0
±
0
±
0
±
0
G
±
0
K
K
P
250
1023
1:02:03
F5.6
p
#
±
0.0
#
o
S-IS Auto
30
p
30
p
4K
Y
F
Y
F
S
-
AF
100
%
Off
KK
3
Use the front dial to select an option.
• Choose from the following options. The image size/compression combinations
available can be selected in the menus. g G Custom Menu X > [K Set]
(P. 236)
Option Image size Compression ratio File format
YSF
5184 × 3888 SuperFine (1/2.7) JPG
YF
5184 × 3888 Fine (1/4) JPG
YN
5184 × 3888 Normal (1/8) JPG
XN
3200 × 2400 Normal (1/8) JPG
RAW 5184 × 3888 Lossless compression ORF
RAW+JPEG RAW plus the JPEG option selected above
• When [Standard], [Dual Same 1], or [Dual Same 3], or [Auto Switch] is selected
for [Card Slot Settings] > [K Save Settings] (P. 237) in G Custom Menu Y, the
selected option applies to the cards in both slots 5 and 4.
• During the high resolution shooting (P. 83), you can select between AF, IF,
JF, AF+RAW, IF+RAW, and JF+RAW.
• AF and AF+RAW are unavailable when [Handheld] is selected for High Res Shot.
• Selecting High Res Shot changes the image quality option selected; be sure to check
the image quality setting before shooting.
$
• RAW fi les store raw image data in an unprocessed state. Choose this format (extension
“.ORF”) for pictures that will later be enhanced.
- Cannot be viewed on other cameras
- Can be viewed on computers using Olympus Workspace Digital Photo Managing
software
- Can be saved in JPEG format using the [RAW Data Edit] (P. 170) retouch option in
the camera menus
To Next Page
Loading...
