237
EN
Menu functions (Custom menus)
4
Setting the card to record to (Card Slot Settings)
MENU G Y [Card Slot Settings]
When there are cards in both slots 1 and 2, you can select which card to record still
images and movies to.
1
Highlight [Card Slot Settings] in G Custom Menu Y and press the Q button.
2
Use FG to select the item and press I.
• Use FG to select the setting and press the Q button.
K Save Settings
Choose the recording method for still images. g “Setting the
saving method for shooting data (K Save Settings)” (P. 99)
K Save Slot
Choose the card used to record photographs. This option takes
effect when [Standard] or [Auto Switch] is selected for [K Save
Settings].
n Save Slot
Choose the card used to record movies.
q Slot
Choose the card used for still image playback when [K Save
Settings] is set to [Dual Independent 1], [Dual Independent 3],
[Dual Same 1], or [Dual Same 3].
Assign Save Folder
Choose the destination folder.
• This option is also available when only one card is inserted.
• Settings other than [n Save Slot] and [Assign Save Folder] can only be accessed in still
photography modes.
%
• You can also choose a card for playback using the q button. Hold the q button and
rotate the front or rear dial to switch cards while playback is in progress. This does not
change the option selected for [q Slot].
• When [z] (Auto Switch) is selected for [K Save Settings], the camera will automatically
switch between the last picture on the fi rst card and the fi rst picture on the second card.
• In n (movie) mode, the slot selected for [n Save Slot] also serves as the [q Slot].
To Next Page
Loading...
