28
EN
Preparation
1
Attaching a lens to the camera
• See page 285 for information on compatible lenses.
1
Confi rm that the camera is off.
2
Remove the rear cap of the lens
and the body cap of the camera.
1
2
Rear cap
2
1
3
Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera’s body.
Lens attachment mark
4
Rotate the lens clockwise until you hear it
click (direction indicated by arrow 3).
• Do not press the lens release button.
• Do not touch internal portions of the camera.
3
To Next Page
Loading...
