255
EN
Connecting the Camera to External Devices
5
Ending the Connection
End the connection to the smartphone. The camera uses Wi-Fi and Bluetooth
®
when
connecting to smartphones. The use of these features may be prohibited in some
countries or regions, in which case they should be disabled.
Ending the Current Connection
1
Use the [Power Off] slider in the OI.Share or
OI.Track settings dialog.
• Alternatively, you can press the camera MENU button
and tap [Disconnect] in the monitor.
100
%
w
1
w
1
Connect to a device.
Device Connection
Disconnect
DisconnectMENU button
E-M1MarkIII
2
Select [Off] for [Power-off Standby] to disable the “auto upload while off”
feature.
• MENU button e setup menu [Wi-Fi/Bluetooth Settings] [Power-off
Standby] [Off]
Disabling Wi-Fi/Bluetooth
®
1
Press the MENU button to display the menus.
2
Highlight [Wi-Fi/Bluetooth Settings] in the e setup
menu and press I on the arrow pad.
1
2
j±0 k±0
100
%
Off
English
s
W
X Settings
Card Setup
Rec View
Wi-Fi/Bluetooth Settings
Firmware
Back Set
Setup Menu
3
Highlight [Availability] using the FG buttons and
press the I button.
Connection Password
Power-off Standby
RAW+JPEG h
Availability On
Off
JPEG
Wi-Fi/Bluetooth Settings
100
%
Wi-Fi MAC Address
Reset Settings
Back Set
4
Highlight [Off] using the FG buttons and press the
Q button.
100
%
Back Set
Off
Wi-Fi/Bluetooth is completely
deactivated and a connection
cannot be initiated.
Availability
To Next Page
Loading...
