269
EN
Connecting the Camera to External Devices
5
• While the camera is connected to a network:
- Sleep mode is disabled
- Interval-timer photography is not available
- Some restrictions apply to the options available during playback
• [PC connection ended] options will be displayed when the camera’s connection to the
network ends. Upload of any remaining data will resume when the connection is re-
established. Note, however, that remaining data will not be uploaded if:
- The Wi-Fi connection is ended using camera controls
- The camera is turned off
- The source memory card is removed
• The upload queue for each card can contain no more than 3000 pictures.
• If “OLYMPUS Capture” displays the message [This application is unable to fi nd a camera
in the camera control mode.], check:
- that the camera has been paired with the computer,
- that you selected the correct computer when connecting to the network, and
- that the camera is registered with the computer (Windows only). g “Readying the
Computer (Windows)” (P. 257)
To Next Page
Loading...
