47
EN
Shooting
2
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the shutter-speed display will
fl ash as shown.
Display Problem/solution
Slow shutter speed
60"
F5.6
Underexposure.
• Choose a lower aperture value.
Fast shutter speed
8000
F5.6
Overexposure.
• Choose a higher aperture value.
• If the subject is still overexposed at the higher value, the limits
of the camera metering system have been exceeded. Use a
third-party ND (Neutral Density) fi lter to reduce the amount of
light entering the camera.
• Shutter speeds as fast as 1/32000 s are available in s
(silent) mode. g “Shooting without shutter sound (Silent
s)” (P. 81), “Performing the sequential/self-timer shooting”
(P. 98)
• When using a fi xed [K ISO] setting, change the setting. g “Changing ISO sensitivity
(ISO)” (P. 75, 91)
Adjusting Settings in Mode A
Use the front and rear dials to adjust the following settings.
Front dial: Exposure compensation (P. 68)
Rear dial: Aperture
• Exposure compensation can also be adjusted using the F
button. Press the F button and then rotate the front or rear
dial.
%
• You can choose the functions performed by the front and rear dials. g G Custom Menu
J > [K Dial Function] (P. 218)
• You can use the Fn lever to reverse the roles of the front and rear dials. The lever
can also be assigned other roles. g G Custom Menu J > [K Fn Lever Function]
(P. 219)
• You can choose whether the display refl ects the effects of exposure settings or maintains
a constant brightness for ease of viewing. At default settings, the effects of exposure
settings are visible in the display. g G Custom Menu Q > [Live View Boost] (P. 188)
• You can stop aperture down to the selected value and preview depth of fi eld.
g “Assigning functions to buttons (Button Function)” (P. 116)
To Next Page
Loading...
