Olympus EVIS EXERA II - OER-AW (Olympus Endoscope Reprocessor)

Chapter 6 Compatible Reprocessing Methods
99
ULTRASOUND GASTROVIDEOSCOPE GF-UCT180
6.9 OER-AW (Olympus Endoscope Reprocessor)
When using Olympus OER-AW, move the elevator control
lever to make the instrument channel outlet of the distal end
opened (i.e., lower the forceps elevator), attach the dedicated
connecting tube to the distal end of the endoscope, and set it
in your OER-AW according to its instructions. When using an
AER/WD that is not recommended by Olympus, set the
forceps elevator according to the AER/WD manufacturer’s
instructions.
Figure 6.1
• OER-AW is intended to clean and disinfect endoscopes and their
accessories.
• OER-AW is not available in the member states of the EU.
• When cleaning and disinfecting the endoscope in OER-AW,
use connectors/retaining rack that are compatible with the
endoscope model. The compatible connectors/retaining rack
for the endoscope model should be listed in the “List of
Compatible Endoscopes/Connecting Tubes” and the
instruction manual for OER-AW or Table 6.11.
Connectors
Retaining rack
For
air/water
channel
For
instrument
channel
For
suction
channel
For
forceps
elevator
channel
OER-AW
*1
MAJ-1517 MAJ-1971 MAJ-840
Table 6.11
Elevator
control lever
Forceps
elevator
Instrument
channel outlet