Chapter 2 Instrument Nomenclature and Specifications
25
ULTRASOUND GASTROVIDEOSCOPE GF-UCT180
2.4 Attaching the chain for water-resistant cap
(MAJ-1739)
• Do not lift the endoscope by the chain for water-resistant cap.
Doing so may result in the fitting part of the chain detaching
from the S-cord connector mount, causing the endoscope to
fall. This could cause operator or patient injury and/or
equipment damage.
• Connect the fitting part only to the S-cord connector mount.
Connecting the fitting part to the suction connector may
impair the connection of the suction tube to the suction
connector. It may also cause the suction tube to become
detached from the endoscope and allow patient debris to
spray.
• The chain for water-resistant cap and water-resistant cap
itself cannot be ultrasonically cleaned; doing so could
damage them. The water-resistant cap with the chain can
only be ultrasonically cleaned if connected to endoscopes
that are being cleaned in an endoscope reprocessor (such as
OER-AW
∗1
) with an ultrasonic cleaning phase.
UDI Indication
The UDI Indication is required by
some countries’ regulations
regarding the identification of medical
device also known as Unique Device
Identification (UDI).
The following information is being
coded in the 2-dimensional barcode
(GS1 Data Matrix):
• (01) 14-digit GS1 Global Trade
Item Number;
• (11) 6-digit date of manufacture;
• (21) 7-digit serial number.
∗1 These products may not be available in some areas.
To Next Page
Loading...
