208
Chapter 11 Reprocessing Endoscopes and Accessories Using an AER/WD
ULTRASOUND GASTROVIDEOSCOPE GF-UCT180
When using Olympus OER-AW, move the elevator control
lever to make the instrument channel outlet of the distal end
opened (i.e., lower the forceps elevator), attach the dedicated
connecting tube to the distal end of the endoscope, and set it
in your OER-AW according to its instructions. When using an
AER/WD that is not recommended by Olympus, set the
forceps elevator according to the AER/WD manufacturer’s
instructions.
Figure 11.1
(Optional) Alcohol flush
Refer to “(Optional) Alcohol flush” on page 155 and page 179 as the
procedure is same.
Dry the endoscope and accessories
Refer to “Dry the endoscope” on page 156 and “Dry the accessories” on
page 182 as the procedure is same.
Elevator
control lever
Forceps
elevator
Instrument
channel outlet
To Next Page
Loading...
