4 Store the removed LED unit safely to
prevent dirt from adhering to the inner
face of the unit.
●
Be careful not to touch the areas around
the terminals at the side of the scope unit.
NOTE
●
Never use the instrument when there is dirt or water droplets inside the LED unit.
Otherwise, the waterproof performance between the LED unit and this unit may be lost, or the
terminals of the LED unit or this unit may be damaged as a result.
TIP
The type of LED unit can
be identified from the label
on it.
UV light type :
IR light type :
White light type :
95
To Next Page
Loading...
