2
Attaching/removing the scope unit
●
IPLEX GT can only be combined with the same type of scope unit as the one that is initially
combined with the base unit.
●
All types of scope units can be combined by expanding the functionality.
1 Open the relay cable door of the base
unit and scope unit.
2 Connect the relay cable.
3 Push the cable bush in firmly so that it is
not floating.
4 Close the relay cable door of the base
unit and scope unit.
Relay cable
Relay cable
door
NOTE
●
To ensure the drip-proof performance, attach the cable bush correctly and close the relay
cable door securely.
●
Turn the power off before connecting and disconnecting the relay cable.
■ Removing the scope unit
To remove, follow the steps for attaching in the reverse order.
25
To Next Page
Loading...
