Olympus IPLEX G Series - Turning on the Light; Checking the Lighting of the Illumination at the Distal; End of the Insertion Tube; Operating the Instrument

4-3 Turning ON the light
1
Checking the lighting of the illumination at the distal end of
the insertion tube
The light intensity is adjusted depending on the brightness of the inspection object.
TIP
●
Always turn OFF the [LIGHT] button ( ) of the base unit when the instrument is not in use,
such as when replacing the optical adapter, etc.
●
When using a UV or IR LED unit which does not illuminate visible light, refer to “Observation
of special light” (page 94).
■ Turning ON/OFF the light manually
Pressing the [LIGHT] button ( ) turns ON or OFF the light.
When the light turns on, the LED icon ( ) is displayed on the LCD monitor.
4-4 Operating the instrument
This instrument can be operated using the buttons, levers and joysticks on the scope unit as
well as the touch panel on the base unit.
FRZ/REC button
ZOOM
lever
LIVE
button
CENT
button
MEAS/OK joystick
VIEW
button
MENU
button
BRT
lever
ANGLE/LOCK joystick
*For more information on the position of the buttons, levers and joysticks, please refer to
“Nomenclature” (page 13).
IPLEX G
38