10-2 Other specifications
1
Other specifications
Item Specifications
Optical system
For optical adapter specifications, see “Optical adapter specifications” (page 113).
Illumination Light from the LED unit is guided to the distal end of the
insertion tube via the light guide.
Distal end
Outer diameter
IV94 series: ø4.0 mm
IV96 series: ø6.0 mm
Distal end rigid
section length
See the specifications of the distal end rigid section length
of the optical adapter.
Angulation IV9420G, IV9435G: 130°
IV9620G, IV9635G: 150°
IV9675G: 120°
IV96100G: 110°
Flexible section
Flexibility IV94 series:
Corrugated tube with uniform stiffness from the distal end of
the insertion tube to the scope unit
IV96 series:
TF corrugated tube with flexibility gradually increasing toward
the distal end of the insertion tube
Outer diameter
IV94 series: ø4.0 mm
IV96 series: ø6.0 mm
Index lines An orange line is displayed at the position of 500 mm from
the distal end of the insertion tube. White lines are displayed
at every 1000 mm from the distal end of the insertion tube.
The number of white lines is increased at every 1000 mm (1
line at 1000 mm, 2 lines at 2000 mm).
One white thick line is displayed at the position of 5000 mm
from the distal end of the insertion tube. Beyond 5000 mm,
the white line is added to the white thick line at every 1000
mm.
Total length IV9420G, IV9620G: 2.0 m
IV9435G, IV9635G: 3.5 m
IV9675G: 7.5 m
IV96100G: 10.0 m
IPLEX G
108
To Next Page
Loading...
