1
Connecting the USB wireless LAN adapter
See “Connecting/disconnecting the USB wireless LAN adapter” (page 33).
2
Enabling the USB wireless LAN adapter from the menu
1 Set MENU → WIRELESS MODE → CONNECT to “ON”.
2 Press OK when the SSID is displayed.
●
A wireless LAN icon appears on the LCD monitor screen and communication by this unit
starts.
3 After completing the above setting, set the displayed SSID on the mobile terminal.
4-13 Using recorded images on a PC
The images recorded with this instrument can be used on a PC with InHelp VIEWER.
The recorded images are loaded directly on the PC from the SDHC card containing those
images.
To use InHelp VIEWER software, download it from the Olympus website (https://www.olympus-
ims.com/en/service-and-support/downloads/).
TIP
Data on microSDHC cards cannot be read directly by a PC. (See “Using the constant video
(only applicable to GX, GX (stereo measurement)) ” (page 55).)
57
To Next Page
Loading...
