5 Insert the relay cable and the protruding insertion tube into the groove.
Push the handle into the groove.
NOTE
●
Do not close the cover of the case if the insertion tube is still protruding from the groove.
Otherwise, the insertion tube may be damaged.
●
Never subject cables to severe bending, pulling, binding, twisting, or crushing forces. Do not
allow a cable to be exposed to heat, which can melt its covering. Otherwise, the cable may
be damaged, which can cause fire and electric shock.
●
Store this product under normal room temperature and humidity.
●
Store the instrument on a level surface in a clean, dry and stable place.
IPLEX G
106
To Next Page
Loading...
