4 Insert the optical data media into the SDHC card slot, select “YES” and press the
[MEAS/OK] joystick.
If an SDHC card for recording images is inside the slot, remove the SDHC card and insert
the optical data media.
5 After ensuring that the adapter name and set number of the stereo optical adapter
are correct, select “YES” and press the [MEAS/OK] joystick.
TIP
If an adapter has already been registered, you will see a screen asking whether you want
to overwrite the old information.
IPLEX G
78
To Next Page
Loading...
