16
Outline of Functions
OER-Elite INSTALLATION MANUAL
Rinse
This function performs the rinsing process if the fluid remains in the basin or in the endoscopes
after an irregularity occurs or the process is stopped midway. For details, refer to Section 7.5,
“Rinse” in “Instructions-Operation manual”.
Leaking scope decontamination
This function decontaminates a leaking endoscope prior to repair. During the decontamination,
positive pressure is applied to the leaking endoscope to avoid fluid invasion and damage to the
endoscope. For details, refer to Section 7.15, “Leaking scope decontamination” in
“Instructions-Operation manual”.
ALT self-check
This function diagnoses the auto leak test function of the device. It is performed automatically at
the end of Load LCG function or as an independent operation. For details, refer to Section 7.13,
“Self-check of auto leak test” in “Instructions-Operation manual”.
To Next Page
Loading...
